Makita 3706 Manual De Instrucciones página 7

Multicortador
Ocultar thumbs Ver también para 3706:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Loosen the thumb screw and remove the shoe. Attach
the vacuum cover, and fasten it securely using the thumb
screw.
Installing vacuum cover with circular guide
1
2
3
Release the thumb screw which serves to secure the
vacuum cover. Align the projections in the circular guide
with the grooves in the vacuum cover, and secure the
vacuum cover and circular guide using the thumb screw.
To adjust the cutting depth, proceed first by loosening the
thumb screw and then by sliding the vacuum cover and
circular guide together. After completion of the adjust-
ment, tighten the thumb screw securely.
1
4
5
2
3
Connecting to Makita vacuum cleaner or dust
collector
Connect the hose of a vacuum cleaner/dust collector to
the dust nozzle. When connecting to Makita vacuum
cleaner, an optional hose 28 mm (1-1/8") in inner diame-
ter is necessary.
When connecting to Makita dust collector, connect the
hose for the dust collector directly to the dust nozzle.
001637
1. Circular guide
2. Projections
3. Vacuum cover
001638
1. Circular guide
2. Thumb screw
3. Vacuum cover
4. Loosen
5. Tighten
001639
1
1. Vacuum cover
2. Hose 28
3. Hose for vac-
2
uum cleaner
3
3
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by Mak-
ita Authorized or Factory Service Centers, always using
Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified in
this manual. The use of any other accessories or
attachments might present a risk of injury to per-
sons. Only use accessory or attachment for its
stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Drywall guide bit 1/4" and 1/8"
Collet cone 1/4"
Collet cone 1/8"
Wrench 17
Circular guide
Vacuum cover
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period of
ONE YEAR from the date of original purchase. Should
any trouble develop during this one year period, return
the COMPLETE tool, freight prepaid, to one of Makita's
Factory or Authorized Service Centers. If inspection
shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace)
without charge.
This Warranty does not apply where:
repairs have been made or attempted by others:
7
001640
1
1. Vacuum cover
2. Hose 28
3. Dust collector
2
EN0006-1

Publicidad

Tabla de contenido
loading

Tabla de contenido