Important Safety Instructions; Keep For Future Reference - EGO BCA1200 Manual De Usario

EN
Do Not
Expose To
Rain
CE
WEEE
XX
Noise
XX
XX
V Volt
mm Millimeter
cm Centimeter
in. Inch
kg Kilogram

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
When using electric brush cutters,
basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury,
including the following:
READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

DANGER!
Do not rely on the tool's insulation against
electric shock. To reduce the risk of electrocution, never
operate the machine in the vicinity of any wires or cables
(power, etc.) which may carry electric current.
CAUTION!
Wear appropriate personal hearing
protection during use. Under some conditions and
durations of use, noise from this product may contribute
to hearing loss.
Training
◾
Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
◾
Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
6
BRUSH CUTTER ATTACHMENT — BCA1200
Do not use in the rain or
leave outdoors while it is
raining.
This product is in accordance
with applicable EC directives.
Waste electrical products
should not be disposed of
with household waste. Take
to an authorized recycler.
Guaranteed sound power
level. Noise emission to the
environment according to
the European community's
Directive.
Voltage
Length or size
Length or size
Length or size
Weight
◾
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
◾
Never operate the machine while people, especially
children, or pets are nearby.
◾
Wear eye protection and stout shoes at all times while
operating the machine.
◾
The distance between the machine and bystanders
shall be at least 15m.
Operation
◾
Use the machine only in daylight or good artificial light.
◾
Never operate the machine with damaged guards or
shields or without guards or shields in place.
◾
Switch on the motor only when the hands and feet are
away from the cutting means.
◾
Always disconnect the machine from the power supply
(i.e. remove the plug from the mains or remove the
disabling device).
◾
whenever leaving the machine unattended;
◾
before clearing a blockage;
◾
before checking, cleaning or working on the
machine;
◾
after striking a foreign object;
◾
whenever the machine starts vibrating abnormally.
◾
Take care against injury to feet and hands from the
cutting means.
◾
Always ensure that the ventilation openings are kept
clear of debris.
Maintenance and storage
◾
Disconnect the machine from the power supply
(i.e. remove the plug from the mains or remove the
disabling device) before carrying out maintenance or
cleaning work.
◾
Use only the manufacturer's recommended
replacement parts and accessories.
◾
Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
◾
When not in use, store the machine out of the reach
of children.
Other safety warnings
◾
Keep Children Away - All visitors should be kept at
least 15m away from work area.
◾
Avoid Dangerous Environments – Don't use
appliances on damp or wet slope.