Danfoss HC6000 Instrucciones De Instalación página 9

Ocultar thumbs Ver también para HC6000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Setting Fan Run-On After Cooling
This feature allows the installer to
select a timed fan overrun following
each cooling demand. The unit is
pre-set to off . Using the + or - buttons
select your preference from off , 30,
60 or 90 seconds.
Press the PROG button to advance to
the next setting option.
Setting Heating/Cooling Deadband
This feature allows the installer or
the building owner to determine
the minimum deadband between
heating and cooling. The unit is pre-
set to 2°C. Using the + or - buttons
select your preference from 1°C, 2°C,
3°C or 4°C.
Press the PROG button to advance to
the next setting option.
(option 3)
+
-
or
(option 4)
+
-
or
GB
9

Publicidad

Tabla de contenido
loading

Tabla de contenido