Waring Commercial CB15V Manual Del Usuario página 7

full 4-liter capacity when working with viscous or fibrous
materials.
3. When cleaning exterior of container, keep it in normal
upright operating position to prevent liquids from running
into the bearing through the bottom end.
HOT BLENDING INSTRUCTIONS: IMPORTANT!
To minimize the possibility of scalding when blending hot
materials, the following precautions and procedures must be
observed:
• Hot materials are those which are 100˚F (38˚C) or hotter.
• A lways start blending on lowest speed setting, then
progress to desired speed.
• N ever stand directly over blender when it is being started
or while it is running.
• C onstant monitoring of the condition of the container lid
gasket and the container lid clamps is mandatory. Replace
these parts if they become worn or loose, or are damaged
in any way.
Motor - Not for Waterjet Cleaning.
The Waring Commercial Blender ball bearing motor requires
no greasing or oiling. Sealed-in lubrication provides smooth
unit operation.
Container - The stainless steel container can be sterilized
without injury to the bearing.
Container pad to be washed and rinsed in solutions noted in
Cleaning and Sanitizing Instructions.
Depending on the operating conditions, service life of the
main components of the container blade assembly, socket
head shaft and shaft seals is 500 hours actual running time.
MAINTENANCE
7