Hydraulic Connections - Astralpool EF Serie Manual Tecnico

ENGLISH
• In the event of power fluctuations in the input power supply, a power supply stabilising system
is to be installed in order to prevent possible damages to the equipment.
ATTENTION:
Do not change the git of the thermal protection engine. If in doubt, contact
your dealer.

14. HYDRAULIC CONNECTIONS

Air-Water EF cooler must be placed in a bypass connection prepared to the output effect of the
cleaning relay and always before any chemical dosing system. Whenever it is not possible to
arrange entry system dispenser 25 cm below water outlet of Air-Water EF cooler, a siphon must be
installed, and for more safety, a valve that prevents the return of chemical products to the pump
when the water flow is interrupted. Respect at all times the hydraulic connectors diameters
specified.
The equipment should never be working without water flow in the hydro system.
NEVER place chemicals concentrate in the pool skimmers.
© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
Page 41 of 50