Replace The Battery - Orbis VIARIS UNI Manual De Usuario

ENG

REPLACE THE BATTERY

The equipment has a 3V CR2032 battery.
To replace the battery or remove it at the end of the life of product, remove the
screws that fix the protection and the power selection knob. Then remove the
circuit from the front by removing the screws that fix it. Turning the circuit we
will have access to the battery.
ATTENTION: This is a product with an embedded battery. Do
not dispose of the product without taking the precaution of
dismantling the battery and depositing it in a suitable recycling
container.
92