Twin-Star International BC2426 Manual De Instrucciones página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 10 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
ASSEMBLY INSTRUCTIONS
1. Attach the Handle (AA) to the Front Door, use the
bolts attached through the pre-drilled holes in the
doors. Then use a Phillips Head Screwdriver to
tighten the bolts.
Two keys (one duplicate) are provided in order to
operate the lock mechanism on your cabinet.
Turn the key counter clockwise to lock the cabinet
and clockwise to unlock your cabinet.
Re-position the key to the middle of the lock to
insert/pull-out. Avoid pulling on the cabinet door
while it is in the locked position to prevent damage
to the lock mechanism and/or door frame.
2. There are levelers located on the bottom of the
Front Wood Feet, the height can be increased by
twisting counter-clockwise.
Use the inner fi nger slot in order to close the doors.
CAUTION: This model features a 3-way
mechanism which allows all 3 doors to open and
close simultaneously. Only open and close
using the center revolving door in order for the
3-way door mechanism to work properly. Failing
to do so may damage the unit.
WARNING: To help prevent child entrapment
keep key out of reach of children and away from
the cabinet.
Hardware Used
Handle
AA
(with bolt)
BB
Key
Fig. 1
Fig. 2
x 1
x 1
3
AA
BB
leveler