Symbols - Ryobi RY15703 Manual Del Operador

Ocultar thumbs Ver también para RY15703:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert Symbol
Read the Operator's Manual
Eye and Hearing Protection
Keep Bystanders Away
Hot Surface
Sharp Blade
Risk of Electrocution
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
:
WARNING
The operation of any power tool can result in foreign objects being thrown into your eyes, which can re-
sult in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety
glasses with side shields, or a full face shield when needed. We recommend Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1.

SYMBOLS

NAME
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SAVE THESE INSTRUCTIONS
4 — English
EXPLANATION
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection which is marked to comply with ANSI
Z87.1 as well as hearing and head protection when operating
this equipment.
Keep all bystanders at least 50 ft. away.
To reduce the risk of injury or damage, avoid contact with
any hot surface.
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.
DANGER! Risk of electrocution!
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use this product. Call Ryobi
customer service for assistance.

Publicidad

Tabla de contenido
loading

Tabla de contenido