Boot And Shutdown; Connect With Pc; Interface Introduction; Bottom Bar Of The Interface - Wolder miTabGOCAR Manual De Usuario

5. DC jack: to connect with 2.5mm DC- 5V/2A charger
Connect power adaptor for charging the built-in rechargeable battery here
6. V+: Press to increase Volume
V- : Press to decrease Volume.
7. TF card
8. Speaker

Boot and Shutdown

Boot: Press and hold the power button, the system will enter the boot
process, System has been started, entering the Android system.
Shutdown: Press the power button, pop-up device options, select
Power off, Click OK, you can safely shut down

Connect with PC

By Micro USB (OTG) interface of the device, you can connect with PC by
Mirco USB crable attached with the device. USB Data transferring is available.
You can operate the files through the PC.
When your device is connected successfully, to pull up the notification area of
the status bar, can see the following icon
Then click
Click
Note: The device also supports the FAT32 format for external devices, for
example U disk, Micro SD card to Transfer data.

Interface Introduction

Bottom bar of the Interface

A B
A: Back B: Home C: Menu D: Screenshot capture
to enter the next
, Then the device can transmission data with PC.
C D E
.
F
7
G H I J