Faq - Troubleshooting - TrekStor I.beat Ghetto blaster MINI Manual De Instrucciones

8) FAQ - troubleshooting

This section contains information on eliminating problems
with your MP3 player.
My i.Beat GhettoBlaster mini freezes and does not
react any more
If this repeatedly occurs for a specific audio file, the file may
be damaged. Delete the file. If this does not eliminate the
problem, reset the player if possible. The reset button is
placed at the rear end of the headphone output and can
be reached e. g. by a bent-up paper clip, which is carefully
inserted into the headphone output. A brief press switches
the player off. Through pressing the
can be switched on a again as usual.
My MP3 player cannot be turned on.
No power
i
When the battery is dead, charge your MP3 player either
with a USB cable connected to your PC, or with a USB charger.
External effects
i
External effects (such as an electrostatic discharge) can cause
your MP3 player to malfunction. If the malfunction continues
after you turn your MP3 player off and on, update the firmware
(the software of the MP3 player). The current firmware for your
MP3 player is on our website under "Downloads". If you have
any questions concerning the firmware update that were not
answered in the instructions, please contact our support team.
My MP3 player does not respond when I press a button.
My MP3 player freezes.
If this repeatedly occurs for a specific audio file, the file may
be damaged. Delete the file.
If this does not eliminate the problem, reset the player. To do
this, switch your MP3 player on and off. If your MP3 players still
freezes, update the firmware.
EN 22
button the player
A