Home Decorators Collection SRWL2172 Guía De Uso Y Mantenimiento página 5

Assembly (continued)
3
Attaching the brackets
□ Center a bracket (CC) against the back of the cabinet (A)
along the top edge.
□
Insert the short screw (BB) through the space in the
bracket (CC), and screw into the cabinet (A) using a
screwdriver.
□
Measure the height of the bracket (CC) from the oor
using a tape measure.
□
Measure this same vertical distance on the wall where
the cabinet (A) will stand against, and mark with a pencil.
□
Use a hammer to gently punch the anchor (DD) halfway
into the wall at the marked location. Finish screwing
in the anchor (DD) with the screwdriver.
□
Place a bracket (CC) ush against the anchor, and insert
the long screw (EE) through the space and into the anchor
(DD). Screw it in using the screwdriver.
4
Securing the linen cabinet
□ Thread the tie (FF) through the slot in the bracket (CC)
attached to the wall, then through the bracket (CC)
attached to the cabinet (A).
□
Thread the end of the tie (FF) through the slot in it's
opposite end, creating a loop.
□
Push the cabinet (A) ush against the wall, and tighten
the tie's (FF) loop until it becomes taught.
CC
BB
X
DD
CC
EE
CC
FF
CC
5
Please contact 1-800-986-3460 for further assistance.
A
X
A
A A
HOMEDEPOT.COM/HomeDecorators