Led Replacement - Seenergy KGH08 Manual De Instrucciones

Commands ELRT
ON/OFF Engine.. By pressing this button, the engine starts as last
speed set before being switched off
Pressing the button, the engine speed is reduced
Selected functions are displayed on this
Pressing the button increases the speed of the motor. When you
reach the maximum speed, you start the Booster which remains in
use for 7 minutes before returning to the previous speed.
Pressing this button you can turn on or turn off the light
Timer. By pressing this button, the motor stays active for 5 minutes
with the speed currently in use (with a blinking light) and then, the
hood switches off completely
White Button for sensor RF (included only in models with remote
control)
Maintenace

Use only a damp doth with neutral liquid detergent.

Do not use wet sponges or cloths, water jets, thinners, solvents, hydrochloric acid,
bleach, alcohol or abrasive substances.

Unplug the appliance or switch off the circuit breaker before carrying out
maintenance operations.

LED Replacement


Disconnect the connector and replace the part
INSTRUCTIONS
EN/1