König CMP-WEBCAM100 Manual De Uso página 3

Installation:
®
Taking Windows XP as an example to show the steps as below:
1.) Press the power button for 2 seconds, the indicator on the back turns blue.
2.) Plug the wireless receiver into your computer, it will find the new device.
After a few seconds the driver will be installed and identified automatically.
3.) Click Start - Settings - Control Panel - Sound and Audio Devices - Audio.
Choose "Wireless Audio Device" as default device in "Sound recording"
(see picture 1)
4.) Click the "Volume" button of "Sound recording", set the volume to maximum.
5.) The camera can be used for all chat programs, like MSN, Skype etc.
picture 1
Safety precautions:
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
3
picture 2