Technical Data - Surtek 112504 Manual De Usuario

THE TEMPERATURE OF THE SOLDERING
IRON IS NOT RISING
Soldering iron temperature is relative low and
is not heating up. Soldering iron cord may
be damaged and needs to be replaced or re-
paired.
Heating element may be damaged and needs
to be replaced.
SOLDERING IRON TEMPERATURE IS INTER-
MITTENT
Soldering iron temperature rises and falls un-
controllably. Soldering iron plug may be loose
from the receptacle unplug the soldering iron
and reattach.
Soldering iron cord may be damaged or loose
and needs to be replaced or repaired.
THE SOLDER WOULD NOT STICK TO THE
SOLDERING PEN
Soldering iron is able to quickly melt solder
but cannot cause the solder to attach to the
tip. Soldering iron tip may already be too dirty
or oxidized.
Temperature could be set too high causing sol-
der to quickly burn away. Adjust to a more suit-
able lower temperature range.
10

TECHNICAL DATA

VOLTAGE-FREQUENCY
TEMPERATURE RANGE
POWER
POWER CONSUMPTION
WEIGHT
127 V ~ 60 Hz
177º C - 482º C
50 W
0,05 kWh
531,4 gr (1,2 lb)