Publicidad
Idiomas disponibles
Idiomas disponibles
Its installation is very simple; You only have to fix it to the wall using lag screws and connect it to a hose. Its high-pressure float
valve ensures a permanent supply of fresh, clean water for your pets.
a.
a.
Remove the top cover (1) by pressing up.
b.
Unscrew the cover (2).
c.
Tighten the adjusting screw (3) if you want a lower water level or unscrew the screw (3) if you want a higher water
level. Check that the float (4) has not been fixed (this would indicate that the water level is minimal or null) and that it
has not been too loose either (this would indicate that the water level is very high and may overflow).
* A level less than 5 cm is recommended.
www.copele.com - Tlf. +34 968 88 27 25 - Fax. +34 968 88 02 02 - El Palmar 30120 - MURCIA - ESPAÑA
USE AND ASSEMBLY INSTRUCTIONS
This automatic plastic waterer maintains a constant volume of
water for your pets, even when you are not at home. It is ideal if
you are away for many hours or if you have several pets.
It is connected to a hose and its level can be regulated.
Made of ABS, it is very resistant, durable and easy to clean.
Measure: Front 18 cm. / Depth 22 cm. / Height 11 cm.
Instalation
Recommended height:
Recommendations:
- Try not to place it in direct sunlight so that the water does
not heat up.
- Keep the drinker clean.
Water level regulation
b.
AQUACÁN PLASTIC DRINKER
Cod. IM-70802
Description
c.
Publicidad
