Operations; Preparation; One Key Takeoff And Landing; Flight Controls - QIMMIQ QID Tower Manual Del Usuario

4. Smartphone holder
Take off the battery well cover and insert the smartphone holder in its place until it clicks locked. Ensure the hold is fixed
firmly in place with a screw at the top of the cover.
The smartphone holder can be adjusted to accommodate phones of varying sizes and then tighten the silver screw at the
back to ensure it is firmly in place. The angle of the phone holder can also be adjusted. Tighten the silver screw at the joint
to ensure it is firmly locked in place.

OPERATIONS

Preparation

Turn on the QID TOWER and put it on a flat surface. The drone signal will flicker. Turn on the remote control and push the left
stick back and forth.

One Key Takeoff and Landing

Push the "H" key to execute one key takeoff and landing.

Flight Controls

1. Left stick (throttle)
Push the left stick forward to increase power and send the QID TOWER up.
Push the left stick backward and the QID TOWER will come down.
33