Memory Recall - Henry Schein 9008181 Instrucciones De Uso

1
FUNCTION OF MEMORY

MEMORY RECALL

1. LD7 can store 60 sets of readings each in '"M1" and "M2", and will
automatically calculate the average value of the latest 3 readings for
"M1" and "M2" respectively. When the memory is full (60 sets of rea-
dings are stored), the oldest reading will be replaced by a newer one.
Memory remains even if power is removed.
2. Once measurement is finished or if in standby mode, the user can
press button "M1" or button "M2" to recall memory.
Press button "M1" or "M2", the display will show the average value
of the latest 3 readings as Fig. 8.
Press again, the display will show '01', which means the latest rea-
ding, then turns to another screen to show readings and measuring
time as Fig. 9.
Press again, the display with show '02', which means the second
to the latest reading...