Piezas De Repuesto - Buchi V-300 Manual De Instrucciones

BÜCHI Labortechnik AG
10.2.3
Manual de instrucciones Vacuum Pump V-300
Más partes de desgaste
Cap nuts, set. 10 pcs, screw cap with hole GL14,
seal EPDM
Content: Cap nuts, seals
Cap nuts. set. 10 pcs, screw cap with hole, GL14
Membrane, set. 2x, for V-300 / V-600, V-100,
V-7xx
Content: 2 membranes with support rings and 1 mem-
brane clamp.
O-ring. For secondary condenser, FKM/FEP,
Ø28.2/2.6 mm
Screw caps. set. 5 pcs, GL14
Set gas ballast. Incl. gas ballast, clip, lever
Set wear part. Membranes, hose barbs
Content: Membrane 2 pcs, support ring 2 pcs, valve 4
pcs, tube intake, tube connection, tube exhaust, elbow
fitting 4 pcs, set hose barbs (11061921). For use with
Vacuum Pump V-300.
Screwing set, Hose barbs and seals GL14
Content: Hose barbs bent 4 pcs, hose barbs straight 1
pc, cap nuts 4 pcs, screw caps 2 pcs, seals EPDM 3
pcs.

Piezas de repuesto

Secondary condensers
Secondary condenser C. Cold trap, P+G-LT
Condenses remaining vapors after the vacuum pump
outlet. Application temperature: -70 to 40 °C. Used with
ice/dry ice. Content: Secondary cold trap condenser
and cap nut GL14 (1 pcs). Compatible with V-100,
V-7xx, V-300 and V-600 vacuum pumps.
N.º de pedido
041999
041956
11065776
11057661
040624
11062527
11062525
11061921
N.º de pedido
047191
Anexo | 10
Figura
Figura
69/76