TrekStor i.Beat classico Manual De Instrucciones página 10

OPERATING INSTRUCTIONS
Note: Please charge the
3 hours before initial use.
EN
1) Controls for the TrekStor
Note: To reset, carefully press the  button with a pointed object (such as an unbent paperclip). The
reset button is recessed deeply in the housing.
2) Connecting the TrekStor
Note for users of Windows® 98: First install the drivers from the accompanying CD before connecting the
i.Beat classico
Use the included USB cable to connect the
Your operating system will immediately recognize the
WITH REMOVABLE STORAGE
3) Charging the TrekStor
i.Beat classico
The
after a maximum of three hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is only reached after approximately 10 charging cycles.
i.Beat classico
i.Beat classico
i.Beat classico
to your PC.
" under "M C ".
Y OMPUTER
i.Beat classico
starts charging as soon as you connect it to a PC. The battery is charged
as described in these operating instructions for at least
A Microphone
B OLED display
C  button (Record)
D  button
E  button
F  button
G  button (Folder navigation)
H  button (Mode)
I  button
J  button (on / off / play / pause)
K  button (Settings / Key lock)
L  button
M Headphone jack 1
N Loop for neck strap
O Headphone jack 2, line-in jack
P USB port
to a PC
i.Beat classico
i.Beat classico
– 10 – – 10 –
to a USB port in your PC.
and will add a "D
EVICE