Oehlbach Scope Omega Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Thank you for choosing an Oehlbach product.
The Oehlbach Scope Omega was developed to enable clear reception of digital signals. Oehlbach's deve-
lopment department has designed an antenna that combines the latest technology with exceptional design.
The Scope Omega is installed within minutes and is easy to use. Before using the antenna, please read this
manual carefully and remove all parts from their packaging.
The Scope Omega Box contains the following parts:
∙ DVB-T2 Antenna
∙ Y-shaped cable with gold-plated IEC-plug & USB-plug
∙ USB power supply unit (The device may only be operated with the supplied power supply unit)
∙ instruction manual
The optimal installation location for the antenna
Before you connect the antenna, you should determine the best location for optimal reception. Usually the
best location is near a window. DVB-T2 receivers often have a signal strength indicator (level indicator) which
can be used to find the best antenna position. The antenna is designed so that horizontal and vertical signals
can be received without changing the position. However, the best position may vary depending on the loca-
tion. It must also be taken into account that digital terrestrial signals can be reflected from various objects,
and this can also affect the reception quality and position. Please test different positions before placing the
antenna in the final position.
Directly connect the Scope Omega to your TV / receiver
1. Make sure that the TV / receiver is switched off. (Some TVs already have a built-in receiver)
2. Connect the coaxial cable of the Scope Omega to the antenna connection of your TV / receiver.
3. Connect the USB cable to the USB power supply unit and this to an electrical outlet.
4. Now you can switch on the TV / receiver and search for receivable programs.
Scope Omega
Possible sources of error
My device is on a metal shelf. Will the antenna work there?
Large metal objects can severely impair the reception quality of the antenna. Try positioning the antenna
outside or above the metal shelf. If you want to use the antenna inside the shelf, you should prefer the
upright position.
My walls have aluminum insulation. Where should I place the antenna?
If you have poor signal quality, place the antenna near a window to avoid interference and improve signal
strength.
Can I use my antenna in a basement?
Radio signals cannot normally be received in a cellar. Please note: Other influences that are not related to
the antenna power can also affect the reception. These can be, for example, long distances to the nearest
4
Receiver / TV
Steckdose
Power Socket
USB Power Adapter
USB Stecker
USB Plug

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Scope audio

Tabla de contenido