Rear Panel Layout - Samson Resolv sub88 Manual Del Usuario

Resolv sub88 Layout
Rear Panel Layout
1 L EFT UNBALANCED INPUT - Female RCA connector that accepts
unbalanced line level signals.
2 L EFT BALANCED INPUT - Female XLR connector that accepts
balanced line level signals.
3 L EFT UNBALANCED OUTPUT - Female RCA connector that
sends unbalanced line level signals to powered satellite speakers
or an amplifier connected to passive satellites.
4 L EFT BALANCED OUTPUT - Male XLR connector that sends the
balanced line level signals to powered satellite speakers or an
amplifier connected to passive satellites.
5 POWER SWITCH – Used to switch on the sub88.
6 A C INLET - Connect the supplied standard IEC power cable here.
7 R IGHT UNBALANCED INPUT - Female RCA connector that
accepts unbalanced line level signals.
8 R IGHT BALANCED INPUT - Female XLR connector that accepts
balanced line level signals.
9 R IGHT UNBALANCED OUTPUT - Female RCA connector that
sends unbalanced line level signals to powered satellite speakers
or an amplifier connected to passive satellites.
10 R IGHT BALANCED OUTPUT - Male XLR connector that
sends the balanced line level signals to powered satellite
speakers or an amplifier connected to passive satellites.
11 P HASE SWITCH - Allows for 180 degrees out-of-phase
operation.
12 S YSTEM LEVEL DOWN - Used to lower the overall output
level.
13 S YSTEM LEVEL UP – Used to raise the overall output
level for the sub88 and connected satellites.
14 F REQUENCY - Adjusts the low frequency end range of the
High-Pass outputs.
15 S UB BYPASS JACK- Used to connect an external switch to
activate the internal mute function.
16 HEAT SINK - Provides cooling of internal power amplifier.

8