Operating The System; Basic Operation - Dometic KTG smartCI 2.0 Instrucciones De Uso

KTGsmartCI2.0
5

Operating the system

5.1

Basic operation

Using the touchscreen
No. in
fig. 1, page 3
1
2
3
4
You can access menus and enter settings as follows:
by touching the sensor buttons
by touching a symbol on the navigation bar
by touching a symbol on the display
An activated function is displayed with a highlighted background.
Touch logic
If only one setting is available (e.g. air conditioner ON/OFF):
➤ Press the corresponding touch symbol.
✓ The corresponding setting is displayed.
If several settings are available (e.g. air conditioner modes or fan speeds):
➤ Press the corresponding touch symbol multiple times until you reach the desired
setting.
✓ The corresponding setting is displayed.
EN
Explanation
Status bar
Control panel
Navigation bar
Sensor buttons
Operating the system
13