Sinmag Europe TAGLIO Manual De Instrucciones página 13

NOTICE
The use of this or any industrial equipment may involve hazards such as hot
surface, sharp objects, or danger from exposure to the electrical power. This
manual is provided to assist you in the safe and efficient use of our equipment.
All equipment, whether considered hazardous or not, should be used in accordance with
principles of good manufacturing practice.
The operator of this equipment must be of a legal age. Before operation, please read
and follow the instructions carefully for maximum safety, and to obtain the best use of our
equipment.
1. INTRODUCTION
1.1 BRIEF INTRODUCTION
This handbook aims at introducing you on how to install, operate and maintain the horizontal
slicer .
Thanks for choosing
contact our local office or dealer that will provide you with instant and ideal service.
1.2. SPECIFICATION
HAUTEUR MAX PRODUIT MAX PRODUCT HEIGHT
❙
VITESSE DU TAPIS CONVEYOR SPEED
❙
NOMBRE DE COUTEAUX NUMBER OF KNIVES
❙
DISTANCE ENTRE LES LAMES DISTANCE BETWEEN THE BLADES
❙
LARGEUR DES TAPIS CONVEYOR BELT WIDTH
❙
POIDS NET MACHINE NET WEIGHT MACHINE
❙
PUISSANCE MOTEUR MOTOR POWER
❙
VOLTAGE VOLTAGE SPANNING
❙ ❙
MAX PRODUKTHOOGTE
❙
BANDSNELHEID
❙
AANTAL MESSEN
❙
RUIMTE TUSSEN DE MESSEN
❙
BREEDTE TRANSPORTBAND
❙
NETTOGEWICHT MACHINE
❙
MOTORVERMOGEN
❙
as your supplier. Any question, please
ENG
90 mm
2.5 -- 16cm / sec
>
3 incl.
5 - 90 mm
405 mm
205 kg
0,525 kW
230V 1Ph
13