Ideal AW 40 Instrucciones De Uso página 20

AW 40
Troubleshooting
Problem
No function
Dragging noise
No humidification/
Fan does not work
Storage
Empty water tank. Clean Air Washer as
described and allow it to dry completely.
Remove screw cap from the water tank
completely and store separately to preserve
the seal. Store Air Washer preferably in the
original packaging in a dry location that is not
too hot.
Disposal
Pass the outdated Air Washer onto your
specialized retailer for professional disposal.
You can find out about further disposal
possibilities from your municipality.
Spare parts and accessories
You can purchase spare parts from
specialized retailers and replace
them on the Air Washer yourself.
Only original parts from the
manufacturer can be used.
Repairs (36 – 38)
All further repairs may only be carried out
from professionals or the service department.
This also applies to a faulty power cord.
Through improper repairs, considerable
danger for the operator can result and
warranty claims lapse.
Possible cause
 Power cord not plugged in
 Humidifier discs not inserted in
the bottom base correctly
 Humidifier discs not inserted in
the bottom base correctly
 No water in the bottom base
 Cleaning mode activated
What to do
 Plug the power cord into the
socket
 Insert the humidifier discs
correctly
 Insert the humidifier discs
correctly
 Refill water tank
 Switch off unit and switch on
again
Guarantee agreements
IDEAL grants a guarantee on its products.
Warranty stipulations are determined by our
national representation.
• If defects due to faulty materials and
workmanship occur within this guarantee
period, IDEAL will repair or replace the
device at its expense.
• IDEAL will only repair or replace the
device, if convincing proof is provided, for
example by a receipt and if the claim is
made within the guarantee period.
• The guarantee is not given on wearing
parts or service parts.
• The guarantee is not valid if the device was
not set up, run and serviced right (as
according to the devices manual)
• The guarantee is not valid if the device was
connected to a power supply not matching
the rating label on the machine.
- 20 -