Safety Instructions - SENSEA ESSENTIAL Manual De Instrucciones

EN
Flushing tank
Descale at least once a year and according to the water hardness of the water supply network to which it is
connected.The active components of the flush tank (float valve, flush valve, shut-off valve) must be serviced once a
year or at a frequency related to the water quality.
Float valve
Connect to the mains water supply.
Mains water pressure between 0.5 and 16 bars, ideally 3 bars.
Maintain annually. Rinse the filter.
Flush mechanism
Maintain annually. Clean its seal.
Stopcock
Maintain annually. Close it and the re-open it.
Support frame
Mounting on a load-bearing floor:
- Check quality of floor before installing. The floor must be flat otherwise it will need to be re-profiled.
- The support frame can be installed on a load-bearing floor only and does not need to be fixed to a wall. Therefore
the wall behind the support frame does not need to be load-bearing. In such cases, the support frame can, for
example, be installed on the reinforced metal substructure of a cavity wall.
The frame is guaranteed provided the mounting accessories in the packaging have been used in accordance with
the installation instructions.
The casing must be in contact with the support frame. Hollow or honeycombed casing panels must not be used.
The opening in the casing for the flush plate must fit the installation template provided.
Heavy product.
Bowl
Because of the dimensional tolerances of the ceramic, there may be a dimensional different of "±1%" between the
nominal dimensions and the actual dimensions. Ceramic is a very hard material but is not unbreakable. Hard
shocks and heavy objects can damage the surface.
Seat
Read instructions before installing.
CARE ADVICE:
We recommend you use a soft sponge or cloth that does not scratch with soapy water (vegetable oil soap or
translucid washing-up liquid). If you want to use a cleaning product, it is better to use a common general
household product. Do not use agressive abrasive or chemical products (hydrofluoric acid, anti-rust type products,
etc.).

SAFETY INSTRUCTIONS

Use the proper tools
Wear work gloves, protective glasses and a face mask.
12