Kensington PresentAir Pro Manual De Inicio Rápido página 11

CLASS 2 LASER SAFETY STATEMENT
1. Emission of a parallel beam of visible light;
2. Maximum Power of 1 milliwatt CW, wavelength
range 650±20 nanometers;
3. Operating temp between 0° C (32° F) to 40° C
(104° F).
• Do not disassemble the device
• Do not use the device outside of its specified
operating temperature range. If the device is
exposed to an environment outside of its
prescribed operation, turn off the device and
allow the temperature to stabilize within the
specified operating range before using the device.
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
FCC RF RADIATED EXPOSURE STATEMENT
This device has been evaluated to meet general RF
exposure requirements. The device can be used in
portable exposure conditions without RF restrictions.
Modifications: Modifications not expressly approved
by Kensington may void the user's authority to
operate the device under FCC regulations and must
not be made.
Shielded Cables: In order to meet FCC requirements,
all connections to equipment using a Kensington input
device should be made using only the shielded cables.
650+/- 20nm
This laser device complies
with International Standard
IEC/EN 60825-1: ED 2. 2007,
Class 2 Laser Product and also
complies with 21 CFR 1040.10
and 1040.11, except for
deviations pursuant to laser
Notice No. 50, dated June 24,
2007:
11