Power On/Off - Kensington PresentAir Pro Manual De Inicio Rápido

Power On/Off

1 From On State—To Turn Power Off
Press and hold the Mode Button.
The PresentAir Pro red LED blinks
rapidly. Release button, and the power
turns off.
2a From Off State—To Turn Power On
Press the Mode Button for 1 second
and release. The green LED blinks, the
power turns on, then the LED turns off.
OR
2b From Off State—To Pair Device
Press and hold the Mode Button from
3 to 6 seconds. The green LED blinks,
then the blue LED blinks slowly and
PresentAir Pro enters pairing mode.
Release button, it stays in pairing mode
for 3 minutes or until paired to a device.
Pairing
A compatible Bluetooth 4.0 device
is required for pairing. Be sure the
Bluetooth wireless is active, on and
ready to connect on the device you
are trying to pair with the PresentAir
Pro. Follow the Bluetooth pairing
instructions provided by the device
manufacturer to successfully connect
with your PresentAir Pro. PresentAir
Pro appears as an Input device for
pairing.
6