Cleaning And Maintenance - Caffitaly System F03MK Manual De Instrucciones

• Place the appliance on a fl at surface.
• Remove the lid and place the mixer/milk frother insert inside the container.
• Fill the container with the recommended amount of milk and refi t the lid.
Note: To prevent milk overfl owing after being frothed, the recommended maximum amount
of milk must be between the two lines marked MIN - MAX FROTH; this is because frothed
milk doubles or triples its initial volume.
• Place the container on the base, then connect the plug to a power socket.
• Keep the switch pressed for 3 seconds; the indicator light comes on steady BLUE. The
mixer insert will rotate to froth milk without heating. The appliance stops automatically
after the set time and the indicator light goes off.
Note: The cycle can be stopped beforehand by pressing the switch once.
• Pour the frothed milk when the appliance has stopped.
• Always switch the appliance off and disconnect it from the power supply when not in
use.
Note: It is advisable to clean any milk residuals from the appliance every time it has
been used, to safeguard health and prevent malfunctioning.
Always unplug the appliance and leave it to cool before cleaning it.
ATTENTION: Do not put the power supply base in water. Do not put any parts in a
dishwasher.
• Remove the gasket from the lid and wash them with warm water and mild detergent
(Fig.1). Rinse thoroughly and dry. Refi t the gasket on the lid.
• Remove the metal whisk from the support (Fig.2), wash them with warm water and refi t.
• Wash the inside of the container using a mild detergent and water, then wipe with a soft
damp cloth.
• Clean the outside of the container using a damp cloth or a mild detergent.
Note: To prevent dulling, do not use abrasive detergents to clean the outside of the
appliance.
FIG.1
English
Frothing milk without heating it

Cleaning and maintenance

FIG.2
9