Bosch Indego 350 Manual Original página 26

26 | English
Main Menu Sub-menu 1
Date & Time
Set Language
Info
Advanced
Tools
Troubleshooting
F 016 L81 848 | (01.10.2018)
Sub-menu 2 Explanation
– Off Alarm is deactivated and it will not sound.
Change the time and date.
Change the display language.
System status Information on battery charge, system information and operating
and charging time for the mower.
Wire ID Change the perimeter wire ID when possible interferences are
nearby.
Sensor setting/ Select between Low (uneven ground), Normal and High (slippery
Lawn condition ground). Mower bump sensor will become more or less sensitive
depending on lawn condition selected.
Remap Deletes the current map of the garden.
Factory Reset Reset the mower to factory settings will delete all personal set-
tings (not PIN).
After a factory reset, the mower will need to remap the the gar-
dens.
Garden overview Displays the number of mapped gardens, their size, their wire ID
and the date of the last time the garden was cut.
Delete garden Delete one specific garden map or select to delete all maps at
once.
Name mower Change the name shown in the display. Only letters of the Latin al-
phabet are possible. The number of letters is limited. This function
is not available in every language.
In some languages (e.g. Czech or Polish) a name change doesn't
have effect on display due to specific grammar requests.
Level check Information about the ground angle of the mower. If the mower is
in the docking station and the dot on the display is not within the
indicated circle, the docking station must be repositioned in a
new, more level location.
Wire signal Detects the wire signal received from the perimeter wire, indicat-
ing its strength (for Service Agent).
The mower will not receive any wire signal while in the docking sta-
tion.
Bosch Power Tools