Attaching The Cable-Management Arm To The Rack - Dell PowerEdge 1-U Guia De Instalacion

Attaching the Cable-Management Arm to the Rack

1
Pull the tray far enough out the front of the rack to give yourself sufficient working room at
the back.
2
Working from the back of the rack, remove the orange shipping screw that secures the cable-
management arm to the back of the tray. See Figure 1-5 for the screw location.
3
Swing the free end of the cable-management arm out to the bracket on the end of the left
stationary rail, and attach the arm to the bracket with the thumbscrew on the end of the arm.
See Figure 1-6.
Figure 1-6. Attaching the Cable-Management Arm
left stationary rail
bracket
1-12
Installation Guide
thumbscrew
cable-management arm