Installing The 1-U Keyboard Tray; Removing The Rack Doors; Installing The Keyboard Tray In The Rack; Attaching The Cable-Management Arm - Dell PowerEdge 1-U Guia De Instalacion

• One pair of RapidRails
• 10-32 x 0.5-inch flange-head Phillips screws and centering washers (four sets)
(not shown in Figure 1-1)
Figure 1-1. 1-U Keyboard Tray Kit Contents
RapidRails

Installing the 1-U Keyboard Tray

Installing the 1-U keyboard tray consists of performing the following tasks in order:
1

Removing the rack doors

2
Marking the rack
3
Installing the slide assemblies (RapidRails) in the rack
4

Installing the keyboard tray in the rack

5
Attaching the cable-management arm to the rack
6

Installing the keyboard in the tray

7
Completing the cable connections
8
Replacing the rack doors
Removing the Rack Doors
See the procedures for removing doors in the documentation provided with your rack cabinet.
CAUTION:
Because of the size and weight of the rack cabinet doors, never attempt to remove or install
them by yourself.
CAUTION:
Store the two doors where they will not injure someone if the doors accidently fall over.
1-U keyboard tray
1-7
Installation Guide