Orima ORP-65-VG Manual De Instrucoes página 28

Gas Connection and Safety
1. For LPG (cylinder) connection, afix
metal clamp on the hose coming from
LPG cylinder. Afix an edge of the hose on
hose inlet connector behind the appliance
by pushing to end through heating the
hose in boiled water. Afterward, bring the
clamp towards end section of the hose and
tighten it with screwdriver. The gasket and
hose inlet connector required for connec-
tion is as the picture shown below.
NOTE: The regulator to be afixed on LPG cylinder should have 300
mmSS feature.
Main Gas Pipe
Gasket
Nut
Natural Gas Connection Hose
True
Gas hose and electric connection of the appliance should
not pass next to hot areas such as back of the appliance.
Gas hose should be connected by making wide angle turns
against breaking possibility. Movement of appliance whose
gas connection is made may cause gas leakage.
False
GB
2. Natural gas connection should be
done by authorized service. For natural
gas connection, place gasket in the nut
at the edge of natural gas connection
hose. To install the hose on main gas
pipe, turn the nut. Complete the con-
nection by making gas leakage control.
True
9
Main Gas Pipe
Gasket
Hose Inlet Connector
Metal Clamp
Lpg Connection Hose
True