Descargar Imprimir esta página

HumanTechnik mona Manual De Uso página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
ding image. When prompted „Delete?", confirm to deleting with „Yes"
or „No"
Video receiver: Reset to factory default
In order to reset the video receiver to the factory defaults:
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select „Default set.".
Press the left key
2. Use „" and „" to enable or disable the function.
3. Press „Save"
After resetting, the receiver will return to standby mode.
PLEASE NOTE: All custom settings and stored photographs will be lost!
Video receiver: AUX output
The charger base features an AUX outlet. It is hereby possible to
connect a vibrating pad or to establish a connection with the signal
systems lisa and signolux.
PLEASE NOTE: In order to use this function, the video receiver must be
placed in the charger base!
Vibrating pad (A-3303-0):
Plug the vibrating pad into the AUX outlet.
Connecting a Humantechnik signal system:
With the auxillary cable A-2974-0, a connection to the following trans-
mitters can be established:
- lisa RF babycry transmitter (A-2468-0)
- signolux Universal Acoustic Transmitter (A-2656-0, to be connected
over the doorbell input socket. Please set the receivers accordingly
to display the baby-signal)
AUX outlet
English 26
to cancel the process.
(Select) to enter the selection.
to save the setting.
to

Publicidad

loading

Productos relacionados para HumanTechnik mona

Este manual también es adecuado para:

A-2575-0A-2577-0A-2579-0