REC ALL THE L AST TEMPER ATURE
To recall the last temperature: Press and hold the On/Off button for at least 2 seconds while
switching the pacifier thermometer on. The last temperature measured appears in the display.
This is indicated by the letter „M" displayed under the degree sign.
CLEANING
Wash the pacifier thermometer after use with luke warm water and a mild soap.
BAT TERY
When the battery is almost exhausted, the
it is time to dispose of the unit.
Note: Do not use the pacifier thermometer as a normal pacifier when the
battery is empty.
SPECIFIC ATIONS
Measuring range:
Accuracy:
Display:
Power consumption:
Dimensions:
Battery life:
Weight:
THE BATH AND ROOM THERMOMETER
Use the bath and room thermometer to conveniently measure the temperature of the baby's
room or the bathwater.
Note: Your baby will feel most comfortable in bath if the water temperature
is between 36.5 °C and 38 °C. A temperature of 39 °C and above is too hot and
your baby could be burned! Babies feel most comfortable when sleeping in
rooms with a temperature of about 18 °C .
USING THE BATH AND ROOM THERMOMETER
To activate the thermometer, tap on the green ring (flower) lightly with your
fingers.
Just let the thermometer float in the bathwater or let it stand on a shelf in the baby's room to
start measuring.
12
symbol appears on the display. This means that
32.0°C — 42.9°C (89.6°F — 109.2°F)
± 0.1°C (±0.2°C) for 35.0 — 38.0°C (95°F — 100.4°F)
ambient temperature of 22°C (71.6°F)
LCD (display unit of measurement: 0.1°C / 0.1°F)
0.15 mW
40mm(L) x 43mm(W) x 53mm(H)
about 200 hours in continuous operation (approx. 2 years if used
10 minutes a day)
approx. 14 g. (with battery)