Battery Connection - Hotline 47HLB300- Super Hawk Guía De Instalación Y Garantía

Connecting it all together
The energiser can be operated from a 9 or 12v battery. 9v and small 12v batteries (up to
36 amp hour 12v batteries) fit into the battery box for easy portability. Standard size leisure
batteries can be run from outside of the battery box.

Battery connection

Unscrew the thumb screws and remove the
energiser top from the battery box.
9v internal battery connection
If not already inserted, clip the 9v lead into the
connector in the base of the energiser top.
10
Place the 9 or 12v battery into the battery box
of the energiser and slot the connectors of the
9v lead into the corresponding connectors on
the battery.
Replace the energiser
top and re secure with
the thumb screws.
Note. for 12v internal battery installation, substitute
9v lead (10) with 12v lead (11).
7
12v battery connection (external)
If not already inserted, clip the 12v lead into
the connector in the base of the energiser
top.
11
Position the lead through the slot in the
battery box and replace the energiser top,
securing with the thumb screws.
11