Safety Precautions - König CMP-USBDVI11 Manual De Uso

4.) Installation Guide
1. Connect your ITV101 via the USB cable to your computer.
a. For the DVI model, connect a monitor to the DVI port on the USB to DVI adapter.
b. For the VGA model, in order to allow a VGA connection, please connect with the DVI-I to D-Sub Adapter.
PC / Notebook
2. Insert the Installation CD that comes with your USB to DVI adapter.
3. Follow the software installation steps to complete the installation.
For detailed information of the software installation, please refer to user guide in the installation CD.
The process will vary depending on your operation system (Microsoft/MAC/Linux).
* Please note that you can install up to six CMP-USBDVI11 adapters on one PC at the same time so
you can connect up to six extra display devices to one computer.

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
Mini USB cable
To reduce risk of electric shock, this product should ONLY be opened
by an authorized technician when service is required. Disconnect the
product from mains and other equipment if a problem should occur.
Do not expose the product to water or moisture.
3
Connect to VGA monitor
DVI-I to VGA adapter
(Optional)
DVI-I to HDMI adapter
(Optional)
DVI cable
Connect to DVI monitor
D-SUB port
HDMI port
DVI-I port