Stiga T8690 Manual De Uso página 5

AT LEAST TWO (2) ADULTS ARE NEEDED TO
COMPLETE THE REST OF THIS ASSEMBLY! WHEN
ASSEMBLING TOPS TO BASE, HANDLE TOP
ASSEMBLIES BY GRASPING ONLY THE TOPS
THEMSELVES. DO NOT GRASP METAL LEGS, U-
SUPPORT, LINKAGE, OR HINGES. THESE PARTS
CAN MOVE AND COULD PINCH FINGERS OR
HANDS CAUSING SERIOUS INJURY! ASSEMBLE
AS SHOWN WITH LEGS FULLY CLOSED AND
TOPS IN A VERTICAL POSITION. DO NOT OPEN
LEGS AND TRY TO ASSEMBLE. TABLE TOPS ARE
HEAVY - DO NO T ATTEMPT TO ASSEMBLE
ALONE!
Table Top
Assembly
With at least 2 adults,
slide Table Top Assembly
onto Strut Tubes (#17).
7
21
U-Support
17
7
7. Attach Table Top Assembly to Base Assembly (that
you put together in steps 1 & 2), as shown in
Figure 4. Pivot Strut Tubes (#17) up as shown;
then, with at least one adult on each side of Table
Top, lift top and align ends of U-support tube
(#21) with tops of Strut Tubes (#17) on Caster
Beams (#7) as shown in Figure 4. Slide tubes
together.
DO NOT OPEN THE TABLE TO PLAYING POSITION
UNTIL BOTH TOPS ARE INSTALLED! DO NOT LEAVE
TABLE STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS BODILY INJURY
OR PROPERTY DAMAGE.
17
Strut Tube
P I
V O
T
S T R
T U B
U T
E S
U P
5
Figure 4