Attach The Cleaning Pad; Assemble The Power Adapter; Install The Safety Tether - ECOVACS ROBOTICS WINBOT 7 Serie Manual De Instrucciones

3.2 Attach the Cleaning Pads
Turn WINBOT 7 over and attach the Cleaning
Pads to their Velcro areas smoothly. Make
sure the Rear Cleaning Pad is placed exactly
within its Velcro area and does not contact or
cover the Cupule (suction ring).

3.4 Install the Safety Tether

If WINBOT 7 is used to clean an outside window, the Safety Pod and Tether
MUST be used.
* If WINBOT 7 is being used to clean an inside window, please skip to step 3.6.
A
C
End A: Robot Power Cord
End C: Safety Pod
3. Operating the Robot

3.3 Assemble the Power Adapter

D
End B: Power Adapter Power Cord
End D: Safety Tether
B
D
7 7
EN