EN
3.2 Start and stop the device
Danger:
•
•
•
You can start using the device when the central unit and piping have been
installed and their functionality ensured.
3.2.1. C.Axpir Initia - Wired
•
To start:
- Connect the hose to a wall inlet valve
- The central starts immediately
•
To stop:
- Disconnect the hose to the wall inlet
- The central stops
3.2.2. C.Axpir Comfort – Wireless system
•
To start:
- Connect the hose to a wall inlet valve (or to the service inlet valve
integrated to the control unit)
- Shake the hose lightly for a maximum of 5 seconds.
- The central starts
•
To stop:
- Press the button of the stop valve located on the handle
- The central stops
26
Risk of injury
Warn children about using the device.
Air speed and depression of the suction hose and the nozzles
are high.