Tabla de contenido
Publicidad
- Turn off the motor before adjusting, lubricating, or performing any maintenance job on the
machine. Never try to perform any repairs when machines are on. Always pay attention!
- Check to see if there are any tools or objects on it, before turning on the machine.
- Look around the machine before turning it on. Keep animal and spectators at a safe distance,
away from eating areas. Be especially careful of children.
- Wear personal operating equipment - PPE - when operating the machine. Prolonged
exposure to noise can cause hearing damage or loss. Wear hearing protectors and safety
glasses.
- Dress appropriately when operating the machine. Tie back long hair and do not wear clothing
which is too loose. Remove rings, chains, and other elements, which could get stuck in the
moving parts or mechanisms.
- Never try to open the machine when it is operating.
- Never touch the pulleys or belts when the machine is turned on. Keep your distance from
moving parts.
- Keep the safety adhesive labels in good condition and legible. Replace them whenever
necessary.
- Keep all the protective shielding in its proper places and do not operate the machine without
it being installed.
- People must not remain on any part of the machine when it is operating.
- Turn off the motor and wait until all the parts are completely motionless, whenever, it is
necessary to get on the machine to perform any adjustment or repair.
- Never try to clean or remove remaining products, straw etc., when the machine is turned on.
Turn off the motor and wait for all the parts to stop moving before cleaning any part of the
machine.
- Never leave the machine operating and leave the area. Always turn off the motor before
leaving the working area.
- Keep the surrounding areas free and unobstructed, so the operator can move safely around
the machine and the product being processed.
- Lower the machine completely to the ground before performing any maintenance,
lubrication, or adjustments. If it is necessary work on the machine when it is lifted hydraylically,
make sure it is supported securely. Hydraulic mechanisms can move without any warning or
due to leakage and causa an accident.
- Never place the machine on cement blocks, hollow bricks, or other supports which can be
crushed from the effects of loads during long periods of time.
- Never work under a hoisted machine raised just on a jack, always put a secure support under
it.
6
MANUAL TÉCNICO DE OPERACIÓN - JF 15D
Pesos y dimensiones
Peso (con caballete) (Kg)
Espacio ocupado por la máquina (m)
Espacio ocupado por la máquina sin centrífuga - con base (m)
Espacio ocupado con centrífuga e con base (m)
Altura de la máquina (con caballete) (m)
Altura de la centrífuga (m)
122
0,95 x 0,70
0,95 x 1,40
1,40 x 2,10
1,25
1,90
25
Publicidad
Tabla de contenido
