Temperature Memory - OWIM Z31482A' Z31482B Manual De Uso

Note: Wait 24 hours after installation until
using the product. This is to allow the self-ad-
hesive pad
of adhesion. After installation, do not change
the position of the self-adhesive pad
otherwise the level of adhesion achieved by
the self-adhesive pad

Temperature memory

Q
P ress the MIN / MAX button
the lowest temperature measured indoors,
"IN"
P ress the MIN / MAX button
display the highest measured temperature.
P ress the MIN / MAX button
return to the display of the current tem-
perature.
Note: if the MIN / MAX button
pressed for 5 seconds, the display auto-
matically reverts to the current temperature.
Note: the stored lowest and highest tem-
perature is deleted every day at 00:00
and measurement begins again.
38 GB/IE
to achieve an optimum level
14
, and outdoors, "OUT"
3
could be reduced.
14
,
14
to show
7
.
4
again to
7
again to
7
is not
7