Technical Specifications - VelLight LEDA310 Manual Del Usuario

• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
• If the protective glass [2] is damaged, disconnect the lamp immediately from the mains. Have it repaired
immediately by a qualified technician. Do not use the lamp with a cracked or broken protective glass.
• This luminaire does not have a built-in device to disconnect it from the electric mains. Make sure to
electrically isolate the luminaire before installation or maintenance activities are performed.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
8.

Technical Specifications

power supply
max. power
LED
colour temperature
beam angle
luminous flux
light efficiency
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 18/07/2012
LEDA310/311/312
LEDA310
85-265V / 50-60Hz
30W
30W 90LM/W Epistar chip
6500K
90°
2010Lm
55Lm/W
290 x 250 x 80mm
2.85kg
LEDA311
85-265V / 50-60Hz
50W
50W 90LM/W Epistar chip
6500K
90°
3360Lm
65Lm/W
350 x 325 x 110mm
5kg
5
LEDA312
85-265V / 50-60Hz
100W
100W 90LM/W Epistar chip
6500K
90°
6125Lm
62Lm/W
420 x 380 x 130mm
6.85kg
©Velleman nv