Troubleshooting; Disposal - Imetec E8701 Instrucciones De Uso

bLADE LO CKING DE VICE
•
Switch the appliance off and unplug the adaptor (9).
•
Remove the adjustable comb (6 or 7) by pressing the adjustment
button (8) and sliding the adjustable comb (6 or 7) off the appliance
[Fig. C3].
•
Push the middle part of the blade locking device (5) upwards with
your thumb until it opens [Fig. D1], and remove it from the appliance.
•
Be careful not to drop the blade locking device (5) to the ground.
•
Clean the blade locking device (5) and the inside of the appliance
using the provided brush [Fig. D2, D3].
•
Place the tab of the blade locking device (5) into the slot and snap
the unit in position [Fig. D4].
PROBLEM
The blades don't
slide
The blades get
hot
The product is packaged in recyclable materials. Dispose of
packaging in accordance with the environmental protection
standards.
Pursuant to Art. 26 of Italian Legislative Decree no. 49 of 14
March 2014 "Implementation of Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE)", the crossed bin
symbol on the appliance or its packaging indicates that the
product must be disposed of separately from other waste at
the end of its useful life.

TROUBLESHOOTING

CAUSE
Failed blade
lubrication
Failed blade
lubrication

DISPOSAL

SOLUTION
Clean with the brush and
lubricate with the oil supplied
Clean with the brush and
lubricate with the oil supplied
25
EN