8)
On completion, the towel warmer should appear as shown in
the figure.
D
C
IMPORTANT
Connect the 2 valves at the outlet C
(not furnished, sold separately) and
link up to the heating system.
IMPORTANT: for the installation to
the heating system predispose two
female outlets of 1/2" et into the wall
minimum 10 mm.
Use the safety valve D on the towel
rails to get rid of any eventual air
bubbles thus allowing the liquid to
circulate in the pipes.
Use
counterbalance the towel rails with
the heating system to ensure an
equal distribution of hot water in the
system.
C
19
one
of
the
valves
to
E
N
G