Assembly; Operation - Rubbermaid UL 12 Manual Del Propietário

Assembly

Note: To ensure proper operation of the vacuum cleaner, verify that the rubber O-rings are in place and all collars are tight.
1
O
P
2
Align slot in lower handle tube with notch in nozzle opening.
Push together firmly. Turn knob clockwise to tighten.
3
O
Snap cloth bag clip onto lower handle tube.
5
M
To keep the cord out of the way while vacuuming, snap it into
the cord clip on the back of the carry handle.
2
L
E
P
O
Align slot in top of lower handle tube with notch in carry handle.
Push together firmly. Turn knob counter-clockwise to tighten.
4
C
P
2
L
Align slot in upper handle tube with notch in carry handle.
Push together firmly. Turn knob clockwise to tighten.
L
When not cleaning, use carry handle to transport vacuum
cleaner.
8

Operation

NOTE:
Fully assemble
before operating.
2
Make a loop in the extension cord below the power cord
connection and slide through top of cord lock. The loop will
fit around the notch below the cord lock.
4
B
1
2
I
Plug extension cord into outlet. Turn power switch to "on".
ENGLISH
1
K
I
Plug extension cord into power cord.
3
Pull free end of extension cord up to take out slack.
5
To position vacuum cleaner, use your foot to hold base while
tilting back.
9