Connect To A Wireless Network - Conceptronic C300RC Manual De Instrucciones

ENGLISH

4. Connect to a Wireless Network

When the hardware is installed by the computer, the Wireless Network Client is ready to use.
You will see an active Wireless Utility in your system tray:
A. Double-click on the system tray icon of the Conceptronic Utility.
The Conceptronic Wireless Utility will be shown like below:
The Conceptronic Wireless Utility will show all the wireless networks in the area of your
computer. If your wireless network is not shown, you can click "Refresh" to rescan for
networks.
B. Click on the network you want to connect to from the list with networks. Click
"Connect".
The Wireless Utility will prompt you with a connection popup which can differ depending on
the configured security of your network.
14