Control Panel; Remote Control - Pur Line HOTI M100 Manual De Usuario

OPERATION
- Make sure that all packaging material has been removed from the product.
- Plug the appliance into the mains with the main switch turned off.
- Turn on the main switch, the device beeps, the operation indicator lights up, and the display shows the
default temperature, which flashes for 3 seconds.

CONTROL PANEL

1 1
MO
TU
WE
TH
FR
SA
SU
9 10

REMOTE CONTROL

1) Set time
Set the time before turn the heater on.
HOUR: Press "Set" button, first "00" flashes, press
MINUTE: Press "Set" button again, second "00" flashes, press
WEEK: Press "Set" button again, "MO" light flashes, press, pulsar
Sunday).
Note: When the "Set" key is pressed, the numbers flash on the display for 5 seconds, you must operate at this
time, or the unit will return to standby mode.
2) General Use
1. Switch on the appliance by pressing the main ON/OFF button, the appliance starts in fan mode.
2 3 4
ºC
RT
ST
11 12
1- ON/OFF: Main power button
2- 24H:
3- MODE: 3 modes - COLD, WARM, HOT
4- Swing: Louver swing up and down
5. LOCK:
6- AUTO: Open Window Detection
7- Set:
8- + :
9- - :
The remote control uses Lithium battery CR2025 3V (not included).
Do not allow children to play with the remote control.
The battery must be removed from the remote control before it is discarded.
The battery must be disposed of safely.
1- Power
2- Heat 1000W
3- Heat 2000W
5
4- Swing
5- Temperature
6
6- Room temperature
7
7- Set temperature
8- LED display
9- Week
8
10- 24H Timer
11- Open Window Detection
12- WiFi
Setting timer from 1-24 hours
Child-Lock function for heater
Set current time
Increase
Decrease
"+"
-
o " " to set the Hour from 01--00 (24h).
"+"
-
o " " to set the minutes from 00--59.
"+"
-
o "
13
" to set the week from Mo--Su (Monday-