Briteq PD-63A Mk2 Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
This unit may only be installed and electrically connected by an
Electrical installation should strictly follow all safety rules and
The complete installation should be approved by an authorized
expert before it will be taken into operation! Each change to an
MAINTENANCE
Switch the unit off and unplug the mains cable BEFORE servicing!
During inspection the following points should be checked:
 All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
 The unit and its installation conditions should be inspected and approved every 3 months by an authorized
expert!
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
Power Input:
Maximum overall power:
Maximum power per phase:
Maximum power per 32A-output:
Maximum power per 16A-output:
Protection class:
Max. Leakage current:
Automatic fuses / phase 16A:
Automatic fuses / phase 32A:
Diameter Power cord:
Diameter internal wiring:
Size:
Weight:
You can download the latest version of this user manual on our website: www.briteq-lighting.com
BRITEQ
®
DANGER TO LIFE:
authorized and qualified electrician!
technical norms for electrical installations in your country!
existing installation should be re-approved as well!
DANGER TO LIFE:
IEC60309-standard, CEE-63A industrial plug
380V–400V / 50Hz, 3phase, 5wire (3P+N+E)
44.160Watt (3x 63A)
14.490Watt (63A)
22.080Watt (3x 32A)
3.680Watt (16A)
class I (only to be connected to class I outlets)
30mA
2x C16 (In=16A, instantaneous tripping current = 5x In)
2x C32 (In=32A, instantaneous tripping current = 5x In)
5x 10mm² (H07RN-F 5G10)
63A-wires: 6AWG (13,3mm²)
32A-wires: 10AWG (5,2mm²)
19"/3U (274 mm deep)
9,7 kg
Every information is subject to change without prior notice
4/24
OPERATION MANUAL
PD-63A Mk2

Publicidad

Tabla de contenido
loading

Tabla de contenido