Mr Coffee CAFE BARISTA BVMC-ECMP1000 Manual Del Usuario página 7

Para preparar café espresso, capuchino y latte
Ocultar thumbs Ver también para CAFE BARISTA BVMC-ECMP1000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TURNING THE UNIT ON
a.
Make sure unit is plugged in.
b. Turn unit on "I".
a.
The 3 control panel lights will start pulsing during heating until the brew and
steam heaters reach the perfect temperature. Once these lights become
solid, the unit is ready to use.
NOTE: It is normal for the Espresso function to be ready before the
Cappuccino and Latte functions.
NOTE: If you leave your unit on for 15 minutes without using, your unit will
go into sleep mode. Press any button to reactivate.
SELECT THE FUNCTION
PREPARING ESPRESSO
a.
Press the Espresso Button "
" once to brew one single shot.
b. Press the Espresso Button "
" twice to brew a double shot.
c.
Press and hold the Espresso Button "
brewing to your preference. When done, press the Espresso Button "
once again to stop brewing. For safety, unit will automatically stop after
brewing 5 ounces.
a.
b.
x1
The unit will start brewing the espresso according to your selection. The unit
will turn off automatically and the lights will become solid indicating that the
cycle has been completed. Your delicious espresso is ready to be enjoyed.
NOTE: To brew less coffee than the preset serving, press the function button
to stop the brewing process when the amount of coffee desired is reached.
English 12
b.
" for 3 seconds to customize the
"
c.
x2
hold for
3 sec.
PREPARING CAPPUCCINO
Prior to preparing your cappuccino, adjust the amount of frothing milk
according to your preference by turning the Froth Control Knob to the right for
more froth and to the left for less froth. For Cappuccino, it is recommended
that the Froth Control Knob be turned to the Cappuccino setting.
MORE FROTH
NOTE: The froth intensity can be adjusted during the brewing cycle.
a.
Press the Cappuccino Button "
b. Press the Cappuccino Button "
a.
x1
NOTE: For a small cup, use the single shot filter. For a large cup, use the
double shot filter.
PREPARING LATTE
Prior to preparing your latte, adjust the amount of frothing according to your
preference by turning the Froth Control Knob to the right for more froth and
to the left for less froth. For Latte, it is recommended that the Froth Control
Knob be turned to the Latte setting.
MORE FROTH
a.
Press the Latte Button "
" once to brew a small cup of latte.
b. Press the Latte Button "
" twice to brew a large cup of latte.
English 13
LESS FROTH
" once to brew a small cup of cappuccino.
" twice to brew a large cup of cappuccino.
b.
x2
LESS FROTH

Publicidad

Tabla de contenido
loading

Tabla de contenido