DRIVER AND SOFTWARE INSTALLATION
To use the SLIDES 2 PC you must install the SLIDES 2 PC Scanner Driver and ArcSoft PhotoImpression 6 in
advance. Both of these items can be found on the included CD.
DRIVER INSTALLATION
1.
Turn on the computer.
2.
Insert the installation CD into the CD-ROM
drive and the installation CD menu will appear.
3.
When you see the following screen, choose
Driver
Installation
Windows
Operating
Windows Operating System, depending on
your system.
4.
Follow the on-screen instructions to install the
driver.
SOFTWARE INSTALLATION
Note: Please "REMOVE" any prior version of
PhotoImpression before installing PhotoImpression
6.
1.
Insert the installation CD into the CD-ROM
drive and the installation CD menu should
appear.
2.
When you see the following screen, choose
ArcSoft PhotoImpression 6 to install the
software.
3.
Follow the on-screen instructions.
4.
The installed software will automatically
create a PhotoImpression 6 logo on your
desktop.
5.
Restart the computer.
USING THE INCLUDED HOLDERS
then
choose
32-bit
System
or
64-bit
1.
Open the negative / positive slide holder as illustrated.
2.
Put a negative film / positive slide into holder as shown.
3.
Close the holder and please make sure the holder close properly.
5